WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

4 x	Mobile 7 dBi Omni
6 x	MMCX Right Angle to N Female Bulkhead 15cm
6 x	U.FL/MHF to N Female Bulkhead 15cm
7 x	Wallmount 25cm
2 x	Bullet M5
2 x	NS2 Nano Station 2, 802.11b/g AP-CPE
2 x	Nanostation M5 loco
2 x	Rocket Dish incl rocket M5
2 x	Nanostation M5
2 x	NanoBracket
2 x	24V POE
1 x	POE with powerled
2 x	Battery 12V 7.2 Ah
2 x	Power supply 18V 0.8A
2 x	Passive PoE Injector with cat5 cable
1 x	POE Power Over Ethernet instertor
2 x	Battery 12V 17 Ah
1 x	48V POE
1 x	23dBi 5GHz Panel Enclosure antenna
7 x	Mikrotik RB411AR
6 x	Enclosure for ALIX.1
1 x	JRC-29 Duplex dish
2 x	N-Male to N-Female Right Angle Adapter
2 x	Mesh omni 2.4 Ghz
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
2 x	Dualband mesh Omni 2.4 / 5.6 Ghz
2 x	N Female to N Female adapter.
1 x	Omni 10 dBi
2 x	1m Jumper cable N-male => N-female low loss H-500
4 x	Case for Alix/wrap with 3 Lan ports
2 x	MCX Male
5 x	Alix 1D
2 x	Nanostation M2
2 x	Routerboard 751U-2HnD
5 x	Mikrotik RB493AH
3 x	Mikrotik RB433AH
2 x	Omni 5 dB N-male
3 x	Nanostation M2 loco
5 x	Mikrotik RB493
2 x	Omnitik U-5HnD
2 x	1m Jumper cable N-male => N-male low loss H-500
2 x	RP-SMA 4m H500 N-male
2 x	RP-SMA 5m H500 N-male
2 x	Mikrotik RB433
2 x	RP-SMA 2m H500 N-male
2 x	RP-SMA 2,5m H500 N-male
1 x	RP-SMA Female to N Male Pigtail
1 x	N-chassis
2 x	RP-SMA 3m H500 N-male
6 x	RB52HN
2 x	AirCam - H.264 outdoor megapixel camera
1 x	RB951-2n
1 x	9 dBi Omni RP-TNC
5 x	UBIQUITI SR71A MIMO 802.11 N/AGB
4 x	Ubuquiti SRX 300, PCI Express a/b/g card
4 x	Patchkabel 2m Cat5e
4 x	Patchkabel 3m Cat5e
4 x	UTP RJ-45 connector
4 x	Patchkabel 1m Cat5e
2 x	FTP RJ-45 connector
2 x	Mini-pci 802.11a R5H
1 x	Lan cable tester
1 x	Patchkabel 7m Cat5e
1 x	Clip-on antenna mmcx
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
1 x	N Male Crimp LMR-195, RG-58
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-100, RG-174, RG-316
1 x	RP-TNC 2,5m H500 N-male
1 x	RP-SMA 150cm H500 N-male
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	N Female Crimp LMR-400
1 x	2.5m Jumper cable N-male => N-male low loss H-500
3 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
1 x	N Male Crimp LMR-400
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
3 x	RP-SMA�Female to N�Female Bulkhead Pigtail
1 x	RP-TNC 4m H500 N-male
4 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	N-Male to N-Male adapter
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-195, RG-58
1 x	RP-TNC 2m H500 N-male
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
1 x	SMA-Female to SMA-Female adapter
5 x	Mast wall mount 10cm
1 x	RP-TNC 5m H500 N-male
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC 3m H500 N-male
1 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
2 x	RP-SMA Female to N Male 20cm
4 x	Wallmount 35cm
1 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	RP-SMA Female Crimp LMR195, RG58
4 x	Wallmount 2-legs 26cm
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
4 x	Muurbeugel set 16cm
4 x	Wallmount 45 cm
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x	Omni 8 dBi

€12,891.00

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]