Hoofdpagina » Winkel » Outdoor CPEs » NanoBracket

€10.00

NanoBracket
[NanoBracket]

The NanoBracket is a holder developed especially for popular Wireless CPE Nano Stations from Ubiquity Networks. The NanoBracket holder enables installation of both versions of NanoStations on walls or masts. It is possible to set NanoStation5 and NanoStation2 to any direction in 90° range by using the NanoBracket, the ball hinge enables this possibility. Mounting kit, NanoBracket, can be used for both versions NS5 and NS2, for old ones and new ones as well. The NanoBracket is made from plastic and is made in the same color as the NanoStation 2 and NanoStation 5, the device and mount look compact and monolithic together. The installation of the NanoBracket holder is very simple and fast although the holder is made with the emphasis on assuring the maximum security of the device. The device is compact and stable after the mounting. All of these make the holder NanoBracket the most optimal mounting solution for the NanoStation devices.

Beoordelingen

Klanten die dit artikel kochten, kochten ook

Power supply 18V 0.8A	RB951-2n	Patchkabel 3m Cat5e
Wallmount 25cm	POE Power Over Ethernet instertor	Patchkabel 1m Cat5e

Categorieën

Batterij (2)
Outdoor CPEs (8)
Antenne-> (14)
Access Points (3)
Mini-PCI (4)
Behuizing (1)
Camera (1)
Coax kabel
Connectors-> (32)
Embedded boards (8)
Pigtails-> (33)
GPS
Montage (9)
Netwerk (8)
Voeding (6)

Informatie

Verzending & Retourneren
Privacy
Algemene voorwaarden
Contact

Fabrikanten

Snelzoeken

Nieuwe artikelen?

AirCam - H.264 outdoor megapixel camera
€120.00

Talen

Artikelnieuwtjes

Verwittig me bij nieuwtjes over NanoBracket

Winkelmandje

6 x	Patchkabel 1m Cat5e
5 x	Nanostation M2
2 x	NanoBracket
5 x	Nanostation M2 loco
4 x	Bullet M5
2 x	Rocket Dish incl rocket M5
5 x	Nanostation M5
3 x	Nanostation M5 loco
5 x	Ubuquiti SRX 300, PCI Express a/b/g card
3 x	UBIQUITI SR71A MIMO 802.11 N/AGB
4 x	Mini-pci 802.11a R5H
9 x	AirCam - H.264 outdoor megapixel camera
5 x	Enclosure for ALIX.1
4 x	Case for Alix/wrap with 3 Lan ports
4 x	Mikrotik RB433AH
7 x	Mikrotik RB493AH
2 x	Mikrotik RB411AR
3 x	Mikrotik RB493
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
1 x	N Female Crimp LMR-195, RG-58
1 x	N-Female Bulkhead to N-Female adapter
1 x	N-Male to N-Male adapter
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	N Male Crimp LMR-400
1 x	RP-TNC Female Crimp LMR-195, RG-58
2 x	N-Male to N-Female Right Angle Adapter
2 x	N Female to N Female adapter.
4 x	Lan cable tester
5 x	FTP RJ-45 connector
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
4 x	Patchkabel 7m Cat5e
2 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
2 x	RP-SMA Female Crimp LMR195, RG58
2 x	MMCX Male Crimp LMR-100, RG-174, RG-316
2 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
2 x	N Male Crimp LMR-195, RG-58
2 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	SMA-Female to SMA-Female adapter
2 x	MCX Male
2 x	Patchkabel 3m Cat5e
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
3 x	Patchkabel 2m Cat5e
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	N Female Crimp LMR-400
1 x	N Female Crimp LMR-100, RG-174, RG-316
2 x	N-chassis
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
1 x	Patchkabel 5m Cat5e
2 x	NS2 Nano Station 2, 802.11b/g AP-CPE
1 x	23dBi 5GHz Panel Enclosure antenna
1 x	Omni 5 dB N-male
1 x	Mesh omni 2.4 Ghz
2 x	RP-SMA Female to N Male Pigtail
1 x	Omni 10 dBi
2 x	Mobile 7 dBi Omni
1 x	JRC-29 Duplex dish
2 x	1m Jumper cable N-male => N-male low loss H-500
2 x	RP-SMA 2m H500 N-male
2 x	RP-SMA 5m H500 N-male
2 x	RP-SMA 3m H500 N-male
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
2 x	RP-SMA 2,5m H500 N-male
2 x	RP-SMA 4m H500 N-male
2 x	1m Jumper cable N-male => N-female low loss H-500
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
4 x	48V POE
3 x	Passive PoE Injector with cat5 cable
1 x	POE Power Over Ethernet instertor
5 x	Battery 12V 17 Ah
6 x	Routerboard 751U-2HnD
2 x	RP-SMA 150cm H500 N-male
1 x	RP-TNC 5m H500 N-male
1 x	Battery 12V 7.2 Ah
5 x	RP-SMA Female to N Female Bulkhead Pigtail
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
1 x	RP-TNC 2,5m H500 N-male
1 x	RP-TNC 4m H500 N-male
5 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	RP-TNC 2m H500 N-male
1 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
1 x	RP-TNC 150cm H500 N-male
1 x	RP-TNC 3m H500 N-male
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
3 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
2 x	U.FL/MHF to N Female Bulkhead 15cm
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	2.5m Jumper cable N-male => N-female low loss H-500
5 x	RB951-2n
4 x	Hinged Die Cast Aluminum Outdoor Enclosure
2 x	Clip-on antenna mmcx
2 x	9 dBi Omni RP-TNC
5 x	Wallmount 25cm
5 x	Wallmount 35cm
5 x	Wallmount 45 cm
5 x	clamp set for balcony
5 x	Rubbertegel 40*40cm
4 x	Keilbout M8
3 x	Mast wall mount 10cm
2 x	Wallmount 2-legs 26cm
1 x	Muurbeugel set 16cm
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400

€14,208.00

€10.00

NanoBracket[NanoBracket]

NanoBracket
[NanoBracket]