Hoofdpagina » Winkel » Outdoor CPEs » NanoBracket

€10.00

NanoBracket
[NanoBracket]

The NanoBracket is a holder developed especially for popular Wireless CPE Nano Stations from Ubiquity Networks. The NanoBracket holder enables installation of both versions of NanoStations on walls or masts. It is possible to set NanoStation5 and NanoStation2 to any direction in 90° range by using the NanoBracket, the ball hinge enables this possibility. Mounting kit, NanoBracket, can be used for both versions NS5 and NS2, for old ones and new ones as well. The NanoBracket is made from plastic and is made in the same color as the NanoStation 2 and NanoStation 5, the device and mount look compact and monolithic together. The installation of the NanoBracket holder is very simple and fast although the holder is made with the emphasis on assuring the maximum security of the device. The device is compact and stable after the mounting. All of these make the holder NanoBracket the most optimal mounting solution for the NanoStation devices.

Beoordelingen

Klanten die dit artikel kochten, kochten ook

Power supply 18V 0.8A	RB951-2n	Patchkabel 3m Cat5e
Wallmount 25cm	POE Power Over Ethernet instertor	Patchkabel 1m Cat5e

Categorieën

Batterij (2)
Outdoor CPEs (8)
Antenne-> (14)
Access Points (3)
Mini-PCI (4)
Behuizing (1)
Camera (1)
Coax kabel
Connectors-> (32)
Embedded boards (8)
Pigtails-> (33)
GPS
Montage (9)
Netwerk (8)
Voeding (6)

Informatie

Verzending & Retourneren
Privacy
Algemene voorwaarden
Contact

Fabrikanten

Snelzoeken

Nieuwe artikelen?

Nanostation M2
€120.00

Talen

Artikelnieuwtjes

Verwittig me bij nieuwtjes over NanoBracket

Winkelmandje

7 x	Lan cable tester
7 x	Wallmount 45 cm
6 x	FTP RJ-45 connector
2 x	9 dBi Omni RP-TNC
1 x	Clip-on antenna mmcx
2 x	Mobile 7 dBi Omni
3 x	Patchkabel 7m Cat5e
6 x	Wallmount 2-legs 26cm
2 x	Patchkabel 3m Cat5e
6 x	Mast wall mount 10cm
6 x	Rubbertegel 40*40cm
4 x	24V POE
7 x	clamp set for balcony
3 x	Wallmount 25cm
5 x	Muurbeugel set 16cm
5 x	Keilbout M8
3 x	Patchkabel 1m Cat5e
1 x	Patchkabel 5m Cat5e
2 x	Passive PoE Injector with cat5 cable
3 x	Wallmount 35cm
2 x	N-chassis
2 x	RP-SMA 2m H500 N-male
7 x	Mikrotik RB493AH
2 x	RP-SMA 5m H500 N-male
2 x	RP-SMA 4m H500 N-male
2 x	RP-SMA 2,5m H500 N-male
2 x	RP-SMA 3m H500 N-male
2 x	RP-SMA Female to N Male Pigtail
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	JRC-29 Duplex dish
2 x	Routerboard 751U-2HnD
1 x	Omni 10 dBi
7 x	Nanostation M2
1 x	Power supply 18V 0.8A
2 x	N-Male to N-Female Right Angle Adapter
2 x	MCX Male
1 x	Omni 5 dB N-male
6 x	Mikrotik RB493
1 x	23dBi 5GHz Panel Enclosure antenna
2 x	1m Jumper cable N-male => N-female low loss H-500
2 x	N Female to N Female adapter.
6 x	AirCam - H.264 outdoor megapixel camera
2 x	Omnitik U-5HnD
1 x	Mesh omni 2.4 Ghz
6 x	RB52HN
6 x	Nanostation M2 loco
2 x	1m Jumper cable N-male => N-male low loss H-500
1 x	SMA-Female to SMA-Female adapter
1 x	N-Female Bulkhead to N-Female adapter
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	N-Male to N-Male adapter
1 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
5 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
1 x	RP-SMA Female Crimp LMR195, RG58
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
5 x	Nanostation M5
1 x	RP-TNC Female Crimp LMR-195, RG-58
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-400
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
4 x	U.FL/MHF to N Female Bulkhead 15cm
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
5 x	Enclosure for ALIX.1
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
4 x	Mikrotik RB433
1 x	5m Jumper cable N-male => N-female low loss H-500
2 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
1 x	N Male Crimp LMR-400
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
3 x	Case for Alix/wrap with 3 Lan ports
1 x	2m Jumper cable N-male => N-male low loss H-500
2 x	RP-SMA Female to N Female Bulkhead Pigtail
2 x	Rocket Dish incl rocket M5
2 x	MMCX Right Angle to N Female Bulkhead 15cm
1 x	RP-SMA 150cm H500 N-male
4 x	Mikrotik RB433AH
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
3 x	RP-SMA Female to N Male 20cm
2 x	NanoBracket
1 x	Nanostation M5 loco
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	N Female Crimp LMR-100, RG-174, RG-316
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	N Male Crimp LMR-195, RG-58
1 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	N Female Crimp LMR-195, RG-58
1 x	RP-TNC 5m H500 N-male
1 x	RP-TNC 2,5m H500 N-male
1 x	RP-TNC 2m H500 N-male
1 x	RP-TNC 150cm H500 N-male
1 x	RP-TNC 3m H500 N-male
1 x	RP-TNC 4m H500 N-male
1 x	Alix 1D
5 x	Battery 12V 17 Ah
3 x	Battery 12V 7.2 Ah
5 x	UBIQUITI SR71A MIMO 802.11 N/AGB
5 x	Mini-pci 802.11a R5H
2 x	Ubuquiti SRX 300, PCI Express a/b/g card
1 x	RB951-2n
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	POE Power Over Ethernet instertor
1 x	UTP RJ-45 connector

€14,154.50

€10.00

NanoBracket[NanoBracket]

NanoBracket
[NanoBracket]