Hoofdpagina » Winkel » Outdoor CPEs » NanoBracket

€10.00

NanoBracket
[NanoBracket]

The NanoBracket is a holder developed especially for popular Wireless CPE Nano Stations from Ubiquity Networks. The NanoBracket holder enables installation of both versions of NanoStations on walls or masts. It is possible to set NanoStation5 and NanoStation2 to any direction in 90° range by using the NanoBracket, the ball hinge enables this possibility. Mounting kit, NanoBracket, can be used for both versions NS5 and NS2, for old ones and new ones as well. The NanoBracket is made from plastic and is made in the same color as the NanoStation 2 and NanoStation 5, the device and mount look compact and monolithic together. The installation of the NanoBracket holder is very simple and fast although the holder is made with the emphasis on assuring the maximum security of the device. The device is compact and stable after the mounting. All of these make the holder NanoBracket the most optimal mounting solution for the NanoStation devices.

Beoordelingen

Klanten die dit artikel kochten, kochten ook

Power supply 18V 0.8A	RB951-2n	Patchkabel 3m Cat5e
Wallmount 25cm	POE Power Over Ethernet instertor	Patchkabel 1m Cat5e

Categorieën

Batterij (2)
Outdoor CPEs (8)
Antenne-> (14)
Access Points (3)
Mini-PCI (4)
Behuizing (1)
Camera (1)
Coax kabel
Connectors-> (32)
Embedded boards (8)
Pigtails-> (33)
GPS
Montage (9)
Netwerk (8)
Voeding (6)

Informatie

Verzending & Retourneren
Privacy
Algemene voorwaarden
Contact

Fabrikanten

Snelzoeken

Nieuwe artikelen?

Omnitik U-5HnD
€90.00

Talen

Artikelnieuwtjes

Verwittig me bij nieuwtjes over NanoBracket

Winkelmandje

32 x	UBIQUITI SR71A MIMO 802.11 N/AGB
26 x	Mikrotik RB433
18 x	Clip-on antenna mmcx
26 x	AirCam - H.264 outdoor megapixel camera
21 x	Bullet M5
26 x	Alix 1D
18 x	Patchkabel 2m Cat5e
17 x	Mast wall mount 10cm
15 x	FTP RJ-45 connector
16 x	Wallmount 35cm
16 x	Nanostation M2 loco
17 x	Wallmount 25cm
17 x	Rubbertegel 40*40cm
17 x	Rocket Dish incl rocket M5
16 x	RP-SMA Female to N Male 20cm
14 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
3 x	5m Jumper cable N-male => N-female low loss H-500
2 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
2 x	3m Jumper cable N-male => N-female low loss H-500
2 x	1.5m Jumper cable N-male => N-female low loss H-500
2 x	2.5m Jumper cable N-male => N-male low loss H-500
3 x	3m Jumper cable N-male => N-male low loss H-500
2 x	1.5m Jumper cable N-male => N-male low loss H-500
5 x	MMCX Male Crimp LMR-100, RG-174, RG-316
2 x	2m Jumper cable N-male => N-male low loss H-500
2 x	4m Jumper cable N-male => N-female low loss H-500
2 x	5m Jumper cable N-male => N-male low loss H-500
11 x	Patchkabel 3m Cat5e
2 x	4m Jumper cable N-male => N-male low loss H-500
2 x	2.5m Jumper cable N-male => N-female low loss H-500
2 x	2m Jumper cable N-male => N-female low loss H-500
3 x	RP-SMA Female Crimp LMR195, RG58
3 x	RP-TNC 150cm H500 N-male
1 x	RP-SMA Male Crimp LMR195, RG58
2 x	N Female Crimp LMR-100, RG-174, RG-316
2 x	N Female Crimp LMR-400
6 x	N-Male to N-Male adapter
1 x	N Male Crimp LMR-400
1 x	N Male Crimp LMR-195, RG-58
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
2 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-195, RG-58
2 x	Patchkabel 5m Cat5e
2 x	5 Ghz 12 dBi Omni
2 x	Mikrotik RB433AH
1 x	Mini-pci 802.11a R5H
1 x	Muurbeugel set 16cm
1 x	Mikrotik RB493
1 x	RB951-2n
3 x	Enclosure for ALIX.1
3 x	POE Power Over Ethernet instertor
5 x	Hinged Die Cast Aluminum Outdoor Enclosure
1 x	Omnitik U-5HnD
2 x	Passive PoE Injector with cat5 cable
2 x	24V POE
3 x	Patchkabel 7m Cat5e
1 x	Power supply 18V 0.8A
2 x	48V POE
1 x	UTP RJ-45 connector
1 x	RP-SMA Female to N Female Bulkhead Pigtail
1 x	Omni 5 dB N-male
1 x	Battery 12V 7.2 Ah
1 x	1m Jumper cable N-male => N-male low loss H-500
1 x	9 dBi Omni RP-TNC
1 x	RP-SMA Female to N Male Pigtail
1 x	Ubuquiti SRX 300, PCI Express a/b/g card

€28,970.00

€10.00

NanoBracket[NanoBracket]

NanoBracket
[NanoBracket]