Hoofdpagina » Winkel » Outdoor CPEs » NanoBracket

€10.00

NanoBracket
[NanoBracket]

NanoBracket

The NanoBracket is a holder developed especially for popular Wireless CPE Nano Stations from Ubiquity Networks. The NanoBracket holder enables installation of both versions of NanoStations on walls or masts. It is possible to set NanoStation5 and NanoStation2 to any direction in 90° range by using the NanoBracket, the ball hinge enables this possibility. Mounting kit, NanoBracket, can be used for both versions NS5 and NS2, for old ones and new ones as well. The NanoBracket is made from plastic and is made in the same color as the NanoStation 2 and NanoStation 5, the device and mount look compact and monolithic together. The installation of the NanoBracket holder is very simple and fast although the holder is made with the emphasis on assuring the maximum security of the device. The device is compact and stable after the mounting. All of these make the holder NanoBracket the most optimal mounting solution for the NanoStation devices.

Beoordelingen

Klanten die dit artikel kochten, kochten ook
Power supply 18V 0.8A
Power supply 18V 0.8A		RB951-2n
RB951-2n		Patchkabel 3m Cat5e
Patchkabel 3m Cat5e
Wallmount 25cm
Wallmount 25cm		POE Power Over Ethernet instertor
POE Power Over Ethernet instertor		Patchkabel 1m Cat5e
Patchkabel 1m Cat5e
Categorieën
Batterij (2)
Outdoor CPEs (8)
Antenne-> (14)
Access Points (3)
Mini-PCI (4)
Behuizing (1)
Camera (1)
Coax kabel
Connectors-> (32)
Embedded boards (8)
Pigtails-> (33)
GPS
Montage (9)
Netwerk (8)
Voeding (6)
Informatie
Verzending & Retourneren
Privacy
Algemene voorwaarden
Contact
Fabrikanten
Snelzoeken
 
Gebruik sleutelwoorden om het artikel te zoeken.
Geavanceerd zoeken
Nieuwe artikelen?
Nanostation M2
Nanostation M2
€120.00
Talen
Nederlands English
Artikelnieuwtjes
NotificatiesVerwittig me bij nieuwtjes over NanoBracket
Winkelmandje
4 x Hinged Die Cast Aluminum Outdoor Enclosure
11 x Mikrotik RB493
4 x Patchkabel 1m Cat5e
7 x RB52HN
7 x NanoBracket
6 x NS2 Nano Station 2, 802.11b/g AP-CPE
4 x Ubuquiti SRX 300, PCI Express a/b/g card
1 x U.FL/MHF to N Female Bulkhead 15cm
2 x RP-SMA Female to N Female Bulkhead Pigtail
2 x SMA Male to RP-TNC Bulkhead 25cm
2 x Wallmount 45 cm
2 x Rubbertegel 40*40cm
2 x Muurbeugel set 16cm
1 x Wallmount 2-legs 26cm
3 x RP-SMA Female to N Male 20cm
1 x MMCX Right Angle to N Female Bulkhead 15cm
2 x Wallmount 35cm
1 x Mast wall mount 10cm
1 x Keilbout M8
1 x U.FL/MHF to RP-SMA Male Bulkhead 16cm
2 x clamp set for balcony
2 x Wallmount 25cm
1 x RP-TNC 2m H500 N-male
1 x RP-TNC 2,5m H500 N-male
1 x RP-TNC 150cm H500 N-male
1 x RP-TNC 5m H500 N-male
1 x RP-TNC 3m H500 N-male
1 x RP-TNC 4m H500 N-male
1 x 3m Jumper cable N-male => N-male low loss H-500
1 x RP-SMA 5m H500 N-male
2 x RP-SMA 4m H500 N-male
2 x 1m Jumper cable N-male => N-male low loss H-500
1 x 2.5m Jumper cable N-male => N-female low loss H-500
1 x RP-SMA 3m H500 N-male
1 x 3m Jumper cable N-male => N-female low loss H-500
1 x 2m Jumper cable N-male => N-female low loss H-500
1 x 1.5m Jumper cable N-male => N-female low loss H-500
1 x 4m Jumper cable N-male => N-female low loss H-500
1 x RP-SMA Female to N Male Pigtail
1 x RP-SMA 150cm H500 N-male
1 x 2m Jumper cable N-male => N-male low loss H-500
1 x 2.5m Jumper cable N-male => N-male low loss H-500
2 x RP-SMA 2,5m H500 N-male
1 x 5m Jumper cable N-male => N-male low loss H-500
2 x 1m Jumper cable N-male => N-female low loss H-500
1 x 1.5m Jumper cable N-male => N-male low loss H-500
1 x RP-SMA 2m H500 N-male
1 x 4m Jumper cable N-male => N-male low loss H-500
1 x 5m Jumper cable N-male => N-female low loss H-500
5 x 48V POE
5 x POE with powerled
5 x Power supply 18V 0.8A
1 x SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
1 x SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x SMA Female connector for LMR-195, RG-58 coaxial cable
1 x SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x RP-SMA Male Crimp LMR195, RG58
1 x N Male Crimp LMR-195, RG-58
1 x RP-TNC Female Crimp LMR-100, RG-174, RG-316
1 x RP-TNC Female Crimp LMR-195, RG-58
1 x N Female Crimp LMR-100, RG-174, RG-316
2 x MCX Male
4 x Alix 1D
1 x MMCX Male Crimp LMR-100, RG-174, RG-316
1 x RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
2 x N-Male to N-Female Right Angle Adapter
1 x N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
2 x N Female to N Female adapter.
3 x Enclosure for ALIX.1
2 x N-Male to N-Male adapter
2 x N Female Crimp LMR-195, RG-58
2 x RP-SMA Male Bulkhead Crimp LMR195, RG58
2 x N-Female Bulkhead to N-Female adapter
2 x N Male Crimp LMR-400
7 x Mikrotik RB493AH
1 x RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
2 x RP-SMA Female Crimp LMR100, RG-174, RG-316
2 x N-chassis
1 x RP-SMA Female Crimp LMR195, RG58
3 x Battery 12V 7.2 Ah
1 x N Female Bulkhead Crimp LMR-100, RG-174, RG-316
2 x Case for Alix/wrap with 3 Lan ports
1 x SMA-Female to SMA-Female adapter
1 x N Male Crimp LMR-100, RG-174, RG-316
1 x N Female Crimp LMR-400
1 x RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x Mobile 7 dBi Omni
2 x Clip-on antenna mmcx
2 x 9 dBi Omni RP-TNC
2 x Patchkabel 7m Cat5e
2 x Battery 12V 17 Ah
1 x FTP RJ-45 connector
1 x UTP RJ-45 connector
1 x 23dBi 5GHz Panel Enclosure antenna
3 x Mikrotik RB411AR
1 x Mesh omni 2.4 Ghz
1 x Omni 5 dB N-male
7 x Routerboard 751U-2HnD
1 x Dualband mesh Omni 2.4 / 5.6 Ghz
1 x Omni 10 dBi
1 x Passive PoE Injector with cat5 cable
6 x Nanostation M2 loco
1 x Mikrotik RB433AH
1 x JRC-29 Duplex dish
1 x 5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
5 x Omnitik U-5HnD
3 x AirCam - H.264 outdoor megapixel camera
4 x RB951-2n
4 x Nanostation M2
5 x Rocket Dish incl rocket M5
4 x Bullet M5
2 x Nanostation M5 loco
3 x Nanostation M5
3 x UBIQUITI SR71A MIMO 802.11 N/AGB
2 x Mini-pci 802.11a R5H
€16,142.50

Copyright © 2024 WirelessAntwerpen Shop
Powered by osCommerce