WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

3 x	Hinged Die Cast Aluminum Outdoor Enclosure
10 x	Mikrotik RB493
8 x	Mikrotik RB493AH
3 x	9 dBi Omni RP-TNC
2 x	Mobile 7 dBi Omni
2 x	Clip-on antenna mmcx
2 x	UBIQUITI SR71A MIMO 802.11 N/AGB
2 x	Mini-pci 802.11a R5H
3 x	Passive PoE Injector with cat5 cable
5 x	48V POE
4 x	Power supply 18V 0.8A
1 x	POE Power Over Ethernet instertor
1 x	2.5m Jumper cable N-male => N-female low loss H-500
3 x	5m Jumper cable N-male => N-female low loss H-500
6 x	Nanostation M5
4 x	NanoBracket
3 x	Nanostation M5 loco
2 x	Rocket Dish incl rocket M5
4 x	RP-SMA 150cm H500 N-male
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	RP-SMA 2,5m H500 N-male
1 x	RP-TNC 4m H500 N-male
2 x	RP-SMA Female to N Male Pigtail
2 x	RP-SMA 3m H500 N-male
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	1m Jumper cable N-male => N-female low loss H-500
1 x	RP-SMA 2m H500 N-male
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	RP-TNC 2,5m H500 N-male
3 x	MMCX Right Angle to N Female Bulkhead 15cm
5 x	U.FL/MHF to N Female Bulkhead 15cm
4 x	1m Jumper cable N-male => N-male low loss H-500
1 x	Nanostation M2
6 x	RB951-2n
7 x	Omnitik U-5HnD
7 x	Routerboard 751U-2HnD
7 x	Wallmount 35cm
8 x	Battery 12V 7.2 Ah
5 x	Rubbertegel 40*40cm
2 x	Alix 1D
3 x	Mikrotik RB433AH
3 x	Wallmount 45 cm
5 x	Keilbout M8
6 x	Mast wall mount 10cm
5 x	Case for Alix/wrap with 3 Lan ports
3 x	Wallmount 2-legs 26cm
5 x	clamp set for balcony
8 x	Lan cable tester
5 x	Patchkabel 3m Cat5e
4 x	Patchkabel 1m Cat5e
4 x	FTP RJ-45 connector
5 x	AirCam - H.264 outdoor megapixel camera
1 x	UTP RJ-45 connector
2 x	Patchkabel 5m Cat5e
3 x	N Female to N Female adapter.
3 x	N-Male to N-Male adapter
2 x	RP-TNC Female Crimp LMR-195, RG-58
1 x	N Female Crimp LMR-100, RG-174, RG-316
2 x	N-chassis
1 x	N Male Crimp LMR-400
2 x	N Female Crimp LMR-400
2 x	MCX Male
2 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
2 x	N-Female Bulkhead to N-Female adapter
2 x	N-Male to N-Female Right Angle Adapter
2 x	MMCX Male Crimp LMR-100, RG-174, RG-316
1 x	N Male Crimp LMR-100, RG-174, RG-316
2 x	N Male Crimp LMR-195, RG-58
1 x	SMA-Female to SMA-Female adapter
2 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	RP-SMA Female Crimp LMR195, RG58
2 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
2 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
2 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
2 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
1 x	RP-TNC 2m H500 N-male
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	RP-TNC 3m H500 N-male
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC 5m H500 N-male
1 x	2m Jumper cable N-male => N-male low loss H-500
4 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	RP-SMA 4m H500 N-male
2 x	RP-SMA 5m H500 N-male
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	NS2 Nano Station 2, 802.11b/g AP-CPE
2 x	RP-TNC 150cm H500 N-male
4 x	RP-SMA Female to N Male 20cm
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	RB52HN
1 x	5Ghz 19 dBi Panel
3 x	Mikrotik RB411AR
2 x	Enclosure for ALIX.1
1 x	RP-SMA Female to N Female Bulkhead Pigtail
1 x	Omni 5 dB N-male
1 x	Bullet M5
1 x	Mikrotik RB433
1 x	Battery 12V 17 Ah
2 x	Patchkabel 7m Cat5e
2 x	Patchkabel 2m Cat5e
1 x	N Female Crimp LMR-195, RG-58

€13,287.50

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]