WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

5 x	Hinged Die Cast Aluminum Outdoor Enclosure
7 x	Mini-pci 802.11a R5H
21 x	Battery 12V 7.2 Ah
20 x	Battery 12V 17 Ah
2 x	Mikrotik RB433AH
1 x	Mesh omni 2.4 Ghz
2 x	MCX Male
2 x	1m Jumper cable N-male => N-male low loss H-500
1 x	23dBi 5GHz Panel Enclosure antenna
5 x	Mikrotik RB493AH
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
2 x	Omni 10 dBi
9 x	Routerboard 751U-2HnD
2 x	Mikrotik RB433
2 x	Enclosure for ALIX.1
9 x	Nanostation M2 loco
9 x	Nanostation M2
10 x	Omnitik U-5HnD
3 x	Mikrotik RB493
2 x	Omni 5 dB N-male
3 x	Mobile 7 dBi Omni
1 x	RP-TNC 4m H500 N-male
5 x	N-chassis
1 x	RP-TNC 2m H500 N-male
2 x	1m Jumper cable N-male => N-female low loss H-500
3 x	N-Male to N-Female Right Angle Adapter
2 x	Lan cable tester
2 x	RP-TNC 2,5m H500 N-male
2 x	RP-SMA 3m H500 N-male
1 x	JRC-29 Duplex dish
1 x	RP-TNC 5m H500 N-male
2 x	RP-SMA 2m H500 N-male
3 x	RP-SMA 4m H500 N-male
1 x	RP-TNC 150cm H500 N-male
3 x	RP-SMA Female to N Male Pigtail
2 x	RP-SMA 5m H500 N-male
2 x	N Female to N Female adapter.
3 x	RP-SMA 2,5m H500 N-male
1 x	RP-TNC 3m H500 N-male
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
1 x	Patchkabel 1m Cat5e
1 x	1.5m Jumper cable N-male => N-female low loss H-500
2 x	5m Jumper cable N-male => N-female low loss H-500
2 x	1.5m Jumper cable N-male => N-male low loss H-500
2 x	9 dBi Omni RP-TNC
3 x	RP-SMA 150cm H500 N-male
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
3 x	Clip-on antenna mmcx
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	5m Jumper cable N-male => N-male low loss H-500
2 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	N Female Crimp LMR-400
2 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
2 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
2 x	RP-TNC Female Crimp LMR-195, RG-58
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x	N-Female Bulkhead to N-Female adapter
1 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
2 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
2 x	SMA-Female to SMA-Female adapter
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	N Male Crimp LMR-195, RG-58
2 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
2 x	RP-SMA Female Crimp LMR195, RG58
1 x	N Female Crimp LMR-195, RG-58
1 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
2 x	N Female Crimp LMR-100, RG-174, RG-316
8 x	RB52HN
2 x	Ubuquiti SRX 300, PCI Express a/b/g card
1 x	UBIQUITI SR71A MIMO 802.11 N/AGB
3 x	clamp set for balcony
3 x	Muurbeugel set 16cm
5 x	Wallmount 25cm
1 x	Wallmount 2-legs 26cm
3 x	Keilbout M8
2 x	Rubbertegel 40*40cm
7 x	RB951-2n
5 x	Power supply 18V 0.8A
3 x	Passive PoE Injector with cat5 cable
4 x	48V POE
3 x	POE with powerled
5 x	Nanostation M5
4 x	NanoBracket
8 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
4 x	MMCX Right Angle to N Female Bulkhead 15cm
6 x	RP-SMA Female to N Male 20cm
8 x	RP-SMA Female to N Female Bulkhead Pigtail
3 x	U.FL/MHF to N Female Bulkhead 15cm
1 x	SMA Male to RP-TNC Bulkhead 25cm
2 x	Mikrotik RB411AR
1 x	Case for Alix/wrap with 3 Lan ports
4 x	24V POE
5 x	Rocket Dish incl rocket M5
3 x	Bullet M5
1 x	Patchkabel 5m Cat5e
3 x	POE Power Over Ethernet instertor
1 x	N-Male to N-Male adapter
3 x	Wallmount 45 cm
1 x	Wallmount 35cm
2 x	Nanostation M5 loco

€16,893.50

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]