WirelessAntwerpen Shop

48v POE

The POE adapter gives "carrier class" performance in a low cost system.With its advanced auto-sensing algorithm it will supply power only to POE recognized end devices. This gives an added measure of protection against damaging equipment. The overload and short circuit protection will shut down power immediately when a short circuit is detected without any damage to the POE system. Typically in 100MB networks the maximum allowable CAT5 cable run is about 100 meters. This is not a limitation of the POE equipment but rather a limitation of the Ethernet standards. It functions with any equipment which meets the IEEE 802.3af POE standards. Power is supplied on RJ-45 connector pins 4/5 (V+) and 7/8 (GND).

Features

"Carrier Class" Power Over Ethernet System
48VDC Auto Ranging Power Supply/ Inserter
Lightning/Surge Protected
Advanced Auto-Sensing Algorithm
Overload and Short Circuit Protection
Minimum Cross Talk and Insertion Loss
Advanced Switching Technology - Runs cool
Complies with IEEE 802.3af POE Standard
FCC and CE Approved
Installation Schematic on Label

Product shipping weight: 0.37 Kgs

18 x	Case for Alix/wrap with 3 Lan ports
21 x	Hinged Die Cast Aluminum Outdoor Enclosure
17 x	Mikrotik RB433
19 x	Patchkabel 3m Cat5e
6 x	SMA Female connector for LMR-195, RG-58 coaxial cable
3 x	5Ghz 19 dBi Panel
3 x	Lightning protection up to 4 ghz
3 x	Battery 12V 17 Ah
1 x	Power supply 18V 0.8A
4 x	POE with powerled
10 x	U.FL/MHF to N Female Bulkhead 15cm
7 x	SMA Male to RP-TNC Bulkhead 25cm
4 x	Alix 1D
4 x	MMCX Right Angle to N Female Bulkhead 15cm
6 x	RP-SMA Female to N Male 20cm
6 x	RP-SMA Female to N Female Bulkhead Pigtail
3 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
2 x	Enclosure for ALIX.1
3 x	Mini-pci 802.11a R5H
4 x	24V POE
2 x	Battery 12V 7.2 Ah
1 x	Routerboard 751U-2HnD
2 x	JRC-29 Duplex dish
4 x	Keilbout M8
2 x	Wallmount 25cm
3 x	Wallmount 35cm
2 x	Rubbertegel 40*40cm
1 x	Mikrotik RB493AH
2 x	RB951-2n
1 x	Patchkabel 2m Cat5e
2 x	Nanostation M2
1 x	Bullet M5
4 x	RP-TNC 2,5m H500 N-male
4 x	RP-TNC 3m H500 N-male
3 x	RP-TNC 4m H500 N-male
2 x	N Male Crimp LMR-100, RG-174, RG-316
4 x	N Male Crimp LMR-400
3 x	5m Jumper cable N-male => N-female low loss H-500
1 x	RP-SMA Male Crimp LMR195, RG58
2 x	Lan cable tester
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
2 x	48V POE
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
2 x	Clip-on antenna mmcx
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	N-Male to N-Male adapter
2 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
1 x	N Female to N Female adapter.
2 x	SMA-Female to SMA-Female adapter
2 x	RP-SMA Female to N Male Pigtail
2 x	Omni 10 dBi
3 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	RP-SMA 2,5m H500 N-male
1 x	RP-SMA 3m H500 N-male
3 x	RP-SMA 150cm H500 N-male
1 x	RP-SMA 5m H500 N-male
2 x	SMA Male connector for LMR-195, RG-58 coaxial cable
2 x	RP-TNC 150cm H500 N-male
1 x	Mast wall mount 10cm
2 x	RP-TNC 2m H500 N-male
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
2 x	N Male Crimp LMR-195, RG-58
2 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	Mesh omni 2.4 Ghz
1 x	Omni 8 dBi
1 x	N Female Crimp LMR-400
1 x	UTP RJ-45 connector
1 x	9 dBi Omni RP-TNC
2 x	1m Jumper cable N-male => N-male low loss H-500
1 x	Mobile 7 dBi Omni
1 x	1m Jumper cable N-male => N-female low loss H-500
3 x	5m Jumper cable N-male => N-male low loss H-500
2 x	3m Jumper cable N-male => N-male low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
2 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	1.5m Jumper cable N-male => N-male low loss H-500
2 x	2.5m Jumper cable N-male => N-female low loss H-500
2 x	POE Power Over Ethernet instertor
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	Rocket Dish incl rocket M5

€9,931.00

€30.00

48V POE
[48V_POE]

€30.00

48V POE[48V_POE]

48V POE
[48V_POE]