WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

3 x	24V POE
4 x	Keilbout M8
2 x	Mast wall mount 10cm
4 x	Power supply 18V 0.8A
3 x	Rubbertegel 40*40cm
4 x	Muurbeugel set 16cm
4 x	Passive PoE Injector with cat5 cable
4 x	POE with powerled
3 x	Wallmount 2-legs 26cm
26 x	AirCam - H.264 outdoor megapixel camera
7 x	Rocket Dish incl rocket M5
4 x	9 dBi Omni RP-TNC
7 x	RB951-2n
4 x	Routerboard 751U-2HnD
5 x	Battery 12V 17 Ah
4 x	Battery 12V 7.2 Ah
2 x	Hinged Die Cast Aluminum Outdoor Enclosure
2 x	Wallmount 35cm
5 x	Lan cable tester
3 x	Patchkabel 7m Cat5e
2 x	Patchkabel 1m Cat5e
1 x	Patchkabel 3m Cat5e
1 x	UTP RJ-45 connector
6 x	Nanostation M5 loco
1 x	FTP RJ-45 connector
6 x	Nanostation M2
2 x	RP-SMA Female to N Male Pigtail
4 x	Nanostation M2 loco
2 x	RP-SMA 4m H500 N-male
2 x	RP-SMA 5m H500 N-male
2 x	RP-SMA 2m H500 N-male
5 x	NanoBracket
2 x	NS2 Nano Station 2, 802.11b/g AP-CPE
2 x	RP-SMA 3m H500 N-male
2 x	RP-SMA 2,5m H500 N-male
1 x	2.5m Jumper cable N-male => N-female low loss H-500
7 x	Mikrotik RB493
2 x	Omnitik U-5HnD
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC 2m H500 N-male
1 x	Omni 5 dB N-male
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	RP-TNC 3m H500 N-male
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	Wallmount 45 cm
1 x	1m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
2 x	MMCX Right Angle to N Female Bulkhead 15cm
1 x	23dBi 5GHz Panel Enclosure antenna
1 x	2.5m Jumper cable N-male => N-male low loss H-500
2 x	RP-SMA 150cm H500 N-male
7 x	Mikrotik RB411AR
1 x	RP-TNC 5m H500 N-male
2 x	1m Jumper cable N-male => N-female low loss H-500
1 x	clamp set for balcony
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	4m Jumper cable N-male => N-male low loss H-500
2 x	RP-SMA Female to N Male 20cm
1 x	RP-TNC 4m H500 N-male
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	5m Jumper cable N-male => N-male low loss H-500
2 x	MCX Male
1 x	RP-TNC 150cm H500 N-male
1 x	Mesh omni 2.4 Ghz
1 x	Wallmount 25cm
2 x	RP-SMA Female to N Female Bulkhead Pigtail
1 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC 2,5m H500 N-male
2 x	N Female to N Female adapter.
2 x	N-Male to N-Female Right Angle Adapter
1 x	Nanostation M5
2 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
1 x	Bullet M5
1 x	JRC-29 Duplex dish
1 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	RP-TNC Female Crimp LMR-195, RG-58
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	SMA-Female to SMA-Female adapter
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
2 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
1 x	N-Male to N-Male adapter
1 x	N-Female Bulkhead to N-Female adapter
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
1 x	RP-SMA Female Crimp LMR195, RG58
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	N Female Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-195, RG-58
1 x	N Female Crimp LMR-400
2 x	N-chassis
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	N Male Crimp LMR-195, RG-58
1 x	N Male Crimp LMR-400
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
5 x	RB52HN
5 x	UBIQUITI SR71A MIMO 802.11 N/AGB
4 x	Ubuquiti SRX 300, PCI Express a/b/g card
4 x	Mini-pci 802.11a R5H
5 x	Case for Alix/wrap with 3 Lan ports
5 x	Mikrotik RB493AH
4 x	Alix 1D
2 x	Mikrotik RB433
1 x	5Ghz 19 dBi Panel
1 x	Mobile 7 dBi Omni

€18,936.00

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]