WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

10 x	Rubbertegel 40*40cm
6 x	Battery 12V 7.2 Ah
2 x	RP-TNC Female Crimp LMR-195, RG-58
3 x	NanoBracket
7 x	24V POE
2 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
2 x	1m Jumper cable N-male => N-male low loss H-500
1 x	Omni 5 dB N-male
7 x	Wallmount 35cm
12 x	RB951-2n
2 x	MCX Male
9 x	Mikrotik RB433AH
1 x	Mesh omni 2.4 Ghz
1 x	23dBi 5GHz Panel Enclosure antenna
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	NS2 Nano Station 2, 802.11b/g AP-CPE
1 x	Omni 10 dBi
5 x	Patchkabel 7m Cat5e
5 x	FTP RJ-45 connector
6 x	Patchkabel 1m Cat5e
5 x	UTP RJ-45 connector
6 x	Patchkabel 2m Cat5e
1 x	9 dBi Omni RP-TNC
5 x	Patchkabel 5m Cat5e
1 x	Clip-on antenna mmcx
9 x	AirCam - H.264 outdoor megapixel camera
8 x	Mikrotik RB433
9 x	Alix 1D
11 x	Mikrotik RB411AR
11 x	Mikrotik RB493AH
1 x	RP-SMA 150cm H500 N-male
2 x	RP-SMA Female to N Male Pigtail
2 x	RP-SMA 5m H500 N-male
10 x	Routerboard 751U-2HnD
2 x	RP-SMA 4m H500 N-male
5 x	Passive PoE Injector with cat5 cable
2 x	RP-SMA 3m H500 N-male
4 x	UBIQUITI SR71A MIMO 802.11 N/AGB
2 x	RP-SMA 2,5m H500 N-male
8 x	Omnitik U-5HnD
8 x	RB52HN
5 x	Mini-pci 802.11a R5H
6 x	Mast wall mount 10cm
2 x	RP-SMA 2m H500 N-male
7 x	Muurbeugel set 16cm
1 x	Rocket Dish incl rocket M5
2 x	Nanostation M5
2 x	N-Male to N-Female Right Angle Adapter
2 x	1m Jumper cable N-male => N-female low loss H-500
1 x	N-Male to N-Male adapter
1 x	N-Female Bulkhead to N-Female adapter
1 x	Nanostation M5 loco
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
1 x	SMA-Female to SMA-Female adapter
2 x	N Female to N Female adapter.
1 x	Bullet M5
1 x	JRC-29 Duplex dish
3 x	Patchkabel 3m Cat5e
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
8 x	Mikrotik RB493
2 x	48V POE
4 x	Power supply 18V 0.8A
2 x	POE with powerled
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	2m Jumper cable N-male => N-female low loss H-500
2 x	N-chassis
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	2.5m Jumper cable N-male => N-female low loss H-500
2 x	U.FL/MHF to N Female Bulkhead 15cm
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
2 x	SMA Female connector for LMR-195, RG-58 coaxial cable
5 x	Wallmount 45 cm
2 x	SMA Male to RP-TNC Bulkhead 25cm
3 x	Battery 12V 17 Ah
3 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
5 x	Wallmount 25cm
6 x	Wallmount 2-legs 26cm
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,
5 x	Keilbout M8
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
3 x	RP-SMA�Female to N�Female Bulkhead Pigtail
2 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
2 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	RP-SMA Female to N Male 20cm
1 x	RP-TNC 2m H500 N-male
1 x	Hinged Die Cast Aluminum Outdoor Enclosure
1 x	RP-TNC 2,5m H500 N-male
1 x	RP-TNC 4m H500 N-male
1 x	RP-TNC 5m H500 N-male
2 x	Ubuquiti SRX 300, PCI Express a/b/g card
1 x	RP-TNC 3m H500 N-male
1 x	RP-TNC 150cm H500 N-male
1 x	N Female Crimp LMR-400
1 x	N Female Crimp LMR-195, RG-58
1 x	N Male Crimp LMR-400
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	N Male Crimp LMR-195, RG-58
1 x	N Female Crimp LMR-100, RG-174, RG-316
7 x	Enclosure for ALIX.1
7 x	Case for Alix/wrap with 3 Lan ports
4 x	clamp set for balcony
2 x	POE Power Over Ethernet instertor
4 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
3 x	RP-SMA Male Crimp LMR195, RG58
2 x	RP-SMA Female Crimp LMR195, RG58
1 x	Nanostation M2 loco
1 x	Nanostation M2

€20,062.50

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]