WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

6 x	Wallmount 45 cm
4 x	Mikrotik RB433AH
5 x	MMCX Right Angle to N Female Bulkhead 15cm
6 x	Wallmount 25cm
5 x	FTP RJ-45 connector
7 x	Rocket Dish incl rocket M5
5 x	Ubuquiti SRX 300, PCI Express a/b/g card
5 x	Patchkabel 5m Cat5e
5 x	UTP RJ-45 connector
4 x	Patchkabel 1m Cat5e
8 x	Nanostation M5
5 x	Rubbertegel 40*40cm
4 x	Mikrotik RB411AR
4 x	U.FL/MHF to N Female Bulkhead 15cm
2 x	1m Jumper cable N-male => N-male low loss H-500
7 x	Routerboard 751U-2HnD
6 x	Power supply 18V 0.8A
1 x	Omni 5 dB N-male
3 x	Enclosure for ALIX.1
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
1 x	JRC-29 Duplex dish
2 x	1m Jumper cable N-male => N-female low loss H-500
2 x	N-Male to N-Female Right Angle Adapter
2 x	N Female to N Female adapter.
8 x	Battery 12V 7.2 Ah
8 x	Battery 12V 17 Ah
5 x	NanoBracket
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
1 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
1 x	RP-SMA Female Crimp LMR195, RG58
1 x	RP-SMA Male Crimp LMR195, RG58
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
1 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
6 x	24V POE
1 x	RP-TNC Female Crimp LMR-195, RG-58
5 x	POE with powerled
1 x	RP-TNC 2m H500 N-male
1 x	Clip-on antenna mmcx
3 x	Nanostation M2
1 x	RP-TNC 5m H500 N-male
2 x	Mikrotik RB493
1 x	RP-TNC 2,5m H500 N-male
4 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	N-Male to N-Male adapter
4 x	Keilbout M8
1 x	RP-TNC 150cm H500 N-male
1 x	RP-TNC 4m H500 N-male
1 x	RP-TNC 3m H500 N-male
1 x	N-Female Bulkhead to N-Female adapter
1 x	SMA-Female to SMA-Female adapter
1 x	9 dBi Omni RP-TNC
2 x	RP-SMA Female to N Male Pigtail
2 x	RP-SMA 4m H500 N-male
2 x	RP-SMA 2m H500 N-male
2 x	RP-SMA 3m H500 N-male
4 x	Hinged Die Cast Aluminum Outdoor Enclosure
2 x	RP-SMA 2,5m H500 N-male
2 x	Alix 1D
1 x	RP-SMA 150cm H500 N-male
3 x	Omnitik U-5HnD
2 x	RP-SMA 5m H500 N-male
2 x	Lan cable tester
1 x	Mikrotik RB493AH
2 x	POE Power Over Ethernet instertor
1 x	Mobile 7 dBi Omni
1 x	Case for Alix/wrap with 3 Lan ports
2 x	clamp set for balcony
2 x	Mast wall mount 10cm
2 x	N-chassis
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-400
1 x	N Female Crimp LMR-195, RG-58
1 x	N Male Crimp LMR-195, RG-58
1 x	N Male Crimp LMR-400
1 x	N Female Crimp LMR-100, RG-174, RG-316
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
2 x	Nanostation M5 loco
2 x	Bullet M5
3 x	NS2 Nano Station 2, 802.11b/g AP-CPE
1 x	Patchkabel 2m Cat5e
2 x	Nanostation M2 loco
1 x	Patchkabel 3m Cat5e
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
2 x	MCX Male
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	2.5m Jumper cable N-male => N-male low loss H-500
3 x	RP-SMA�Female to N�Female Bulkhead Pigtail
1 x	23dBi 5GHz Panel Enclosure antenna
1 x	Passive PoE Injector with cat5 cable
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	Mesh omni 2.4 Ghz
1 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
1 x	Muurbeugel set 16cm
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
2 x	RP-SMA Female to N Male 20cm
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
2 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
1 x	Wallmount 35cm
1 x	SMA Female Bulkhead Crimp connector for LMR-400, RG-8, CFD 400,

€13,120.00

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]