WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

2 x	Routerboard 751U-2HnD
4 x	Nanostation M2 loco
5 x	RB52HN
4 x	RB951-2n
7 x	Mikrotik RB411AR
5 x	Rocket Dish incl rocket M5
3 x	NS2 Nano Station 2, 802.11b/g AP-CPE
4 x	Nanostation M5 loco
2 x	Bullet M5
2 x	Nanostation M5
4 x	Alix 1D
4 x	Mini-pci 802.11a R5H
3 x	UBIQUITI SR71A MIMO 802.11 N/AGB
4 x	Case for Alix/wrap with 3 Lan ports
4 x	Mikrotik RB433AH
20 x	AirCam - H.264 outdoor megapixel camera
2 x	Battery 12V 17 Ah
3 x	Battery 12V 7.2 Ah
2 x	1m Jumper cable N-male => N-female low loss H-500
2 x	Clip-on antenna mmcx
2 x	9 dBi Omni RP-TNC
1 x	Mobile 7 dBi Omni
1 x	5 GHz. MTI Panel Antenna 23 dBi Dual Pol. (2xN)
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	JRC-29 Duplex dish
2 x	N-Male to N-Female Right Angle Adapter
5 x	Mikrotik RB493
4 x	Power supply 18V 0.8A
3 x	Ubuquiti SRX 300, PCI Express a/b/g card
5 x	Wallmount 2-legs 26cm
3 x	48V POE
2 x	Mikrotik RB433
4 x	POE with powerled
4 x	24V POE
4 x	clamp set for balcony
4 x	Muurbeugel set 16cm
4 x	Wallmount 45 cm
1 x	SMA-Female to SMA-Female adapter
2 x	POE Power Over Ethernet instertor
2 x	N Female to N Female adapter.
1 x	N Female Crimp LMR-100, RG-174, RG-316
1 x	N-chassis
3 x	Mast wall mount 10cm
1 x	N Male Crimp LMR-195, RG-58
1 x	N Male Crimp LMR-400
1 x	Passive PoE Injector with cat5 cable
1 x	N Male Crimp LMR-100, RG-174, RG-316
1 x	N Female Crimp LMR-195, RG-58
2 x	Wallmount 35cm
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	Wallmount 25cm
1 x	N Female Crimp LMR-400
1 x	N-Male to N-Male adapter
1 x	N-Female Bulkhead to N-Female adapter
1 x	N Female Bulkhead Crimp LMR-100, RG-174, RG-316
1 x	RP-SMA Male Bulkhead Crimp LMR195, RG58
1 x	RP-SMA Female Crimp LMR100, RG-174, RG-316
1 x	RP-TNC Female Crimp LMR-100, RG-174, RG-316
1 x	SMA Female Crimp connector for LMR-100, RG-174, RG-316 coaxial c
1 x	RP-TNC Female Crimp LMR-195, RG-58
1 x	RP-SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
1 x	SMA Female bulkhead connector for LMR195, RG58 coaxial cable
1 x	SMA Male connector for LMR-195, RG-58 coaxial cable
1 x	RP-SMA Male Crimp LMR195, RG58
4 x	Hinged Die Cast Aluminum Outdoor Enclosure
1 x	SMA Female connector for LMR-195, RG-58 coaxial cable
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
1 x	SMA Male connector for LMR100 , RG-174, RG-316 coaxial cable
1 x	RP-SMA Female Crimp LMR195, RG58
1 x	RP-SMA Male Bulkhead Crimp LMR100, RG-174, RG-316
2 x	MCX Male
1 x	RP-TNC Female Crimp LMR-400, RG-8, CFD-400, Low loss 400
1 x	SMA Male Crimp LMR-400, RG-8, CFD 400, Low loss 400
4 x	Patchkabel 3m Cat5e
3 x	Lan cable tester
3 x	FTP RJ-45 connector
5 x	RP-SMA�Female to N�Female Bulkhead Pigtail
4 x	SMA Male to RP-TNC Bulkhead 25cm
3 x	UTP RJ-45 connector
3 x	Patchkabel 7m Cat5e
3 x	Patchkabel 5m Cat5e
1 x	Patchkabel 2m Cat5e
1 x	RP-TNC 2m H500 N-male
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	RP-SMA Female to N Male Pigtail
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	RP-TNC 4m H500 N-male
1 x	RP-SMA 4m H500 N-male
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	RP-SMA 5m H500 N-male
1 x	RP-SMA 2,5m H500 N-male
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	RP-TNC 150cm H500 N-male
1 x	RP-TNC 5m H500 N-male
1 x	RP-SMA 3m H500 N-male
1 x	RP-SMA 2m H500 N-male
1 x	RP-TNC 3m H500 N-male
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	RP-TNC 2,5m H500 N-male
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	1m Jumper cable N-male => N-male low loss H-500
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	RP-SMA 150cm H500 N-male
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	RP-SMA Female to N Male 20cm
1 x	Omni 10 dBi
1 x	NanoBracket

€14,631.00

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]