WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

3 x	Mast wall mount 10cm
4 x	MMCX Right Angle to N Female Bulkhead 15cm
2 x	Mikrotik RB433
2 x	Patchkabel 7m Cat5e
2 x	Enclosure for ALIX.1
3 x	Battery 12V 17 Ah
2 x	Alix 1D
1 x	Mikrotik RB433AH
4 x	Ubuquiti SRX 300, PCI Express a/b/g card
1 x	Omnitik U-5HnD
3 x	Wallmount 25cm
4 x	RB52HN
2 x	Mikrotik RB411AR
3 x	AirCam - H.264 outdoor megapixel camera
2 x	Patchkabel 1m Cat5e
1 x	Routerboard 751U-2HnD
1 x	Passive PoE Injector with cat5 cable
3 x	Wallmount 45 cm
2 x	UTP RJ-45 connector
3 x	Wallmount 35cm
2 x	Case for Alix/wrap with 3 Lan ports
3 x	clamp set for balcony
4 x	Mini-pci 802.11a R5H
3 x	Wallmount 2-legs 26cm
1 x	48V POE
2 x	Rubbertegel 40*40cm
2 x	Nanostation M5
3 x	UBIQUITI SR71A MIMO 802.11 N/AGB
3 x	U.FL/MHF to N Female Bulkhead 15cm
1 x	N-Female Bulkhead to N-Female adapter
1 x	SMA-Female to SMA-Female adapter
1 x	N-Male to N-Female Right Angle Adapter
1 x	N Female to N Female adapter.
1 x	N-Male to N-Male adapter
1 x	RP-SMA Female to N Male 20cm
1 x	U.FL/MHF to RP-SMA Male Bulkhead 16cm
1 x	1.5m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	Lan cable tester
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	FTP RJ-45 connector
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	Patchkabel 3m Cat5e
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
1 x	1m Jumper cable N-male => N-female low loss H-500
1 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	Patchkabel 2m Cat5e
1 x	1m Jumper cable N-male => N-male low loss H-500
1 x	N Female Crimp LMR-400
1 x	SMA Male to RP-TNC Bulkhead 25cm
1 x	N Female Crimp LMR-100, RG-174, RG-316
1 x	Mikrotik RB493AH
1 x	Muurbeugel set 16cm
1 x	N Male Crimp LMR-195, RG-58
1 x	Keilbout M8
1 x	N Female Crimp LMR-195, RG-58
1 x	N Female Bulkhead connector for LMR-195, RG-58 coaxial cable
1 x	Battery 12V 7.2 Ah
1 x	N Male Crimp LMR-400

€4,857.50

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]