WirelessAntwerpen Shop

Nieuwe pagina 1

Features:

Triband APXtender Indoor Rubber Ducky Omnidirectional Antenna

Tri-Band Operation : 2.4GHz, 5.3GHz and 5.8GHz
Direct replacement for 2.2dBi rubber ducky antenna that is standard on most indoor access points and bridges
Extends Range of Wireless Access Points or Wireless Bridges
802.11a Wireless Equipment
802.11b Wireless Equipment
802.11g Wireless Equipment
OEM Equipment

Description:

The TriBand APXtender Indoor Rubber Ducky omnidirectional antenna is used to extend the range of indoor access points or client bridges in 2.4GHz, 5.3GHz and 5.8GHz wireless LAN environments. The antenna is a "TriBanb" rather then "Wide Band" antenna design in that it will reject out of band signals between the bands of interest. This feature helps to minimize interference and system noise. The antenna features a 360 Degree Horizontal Tranmissiong Pattern and a 90 Degree Vertical Transmission Pattern. The transmit/receive element can be tilted in relation to the base to direct signal where it is needed (0,45, 90 degrees).

Antennas are available in a variety of connectors to fit most wireless radio equipment

Parameter	Min	Type	Max	Units
Frequency Range	2400		5825	MHz
Gain	2400MHz 5150MHz 5725MHz	2.2 4 5		dBi
VSWR		1.5:1
Impedance		50		Ohm
Input Power			10	W
Operating Temp	-10		+60	Deg C
Weight	0.9 (25)			oz (gr)
Dimension	6.25 x 0.5D (159 x 12.7D)			in (mm)

Product shipping weight: 0.050 Kgs

3 x	RP-SMA Female to N Male 20cm
3 x	Nanostation M2
2 x	Wallmount 35cm
6 x	Mikrotik RB411AR
4 x	Alix 1D
3 x	RB52HN
2 x	FTP RJ-45 connector
6 x	Mikrotik RB493
1 x	MMCX Right Angle to N Female Bulkhead 15cm
2 x	Patchkabel 3m Cat5e
1 x	clamp set for balcony
1 x	Wallmount 45 cm
2 x	Patchkabel 2m Cat5e
2 x	Battery 12V 7.2 Ah
2 x	RP-SMA�Female to N�Female Bulkhead Pigtail
1 x	Rocket Dish incl rocket M5
3 x	Power supply 18V 0.8A
1 x	U.FL/MHF to N Female Bulkhead 15cm
1 x	UBIQUITI SR71A MIMO 802.11 N/AGB
2 x	Patchkabel 1m Cat5e
6 x	Mikrotik RB493AH
4 x	Mikrotik RB433
2 x	NS2 Nano Station 2, 802.11b/g AP-CPE
2 x	SMA Male to RP-TNC Bulkhead 25cm
2 x	POE with powerled
2 x	Battery 12V 17 Ah
1 x	Nanostation M5
4 x	Case for Alix/wrap with 3 Lan ports
4 x	Enclosure for ALIX.1
2 x	POE Power Over Ethernet instertor
1 x	Bullet M5
1 x	Mast wall mount 10cm
2 x	Rubbertegel 40*40cm
1 x	Muurbeugel set 16cm
2 x	48V POE
2 x	UTP RJ-45 connector
2 x	Patchkabel 7m Cat5e
1 x	Mini-pci 802.11a R5H
2 x	24V POE
1 x	NanoBracket
2 x	1m Jumper cable N-male => N-male low loss H-500
1 x	2m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-male low loss H-500
2 x	MCX Male
1 x	2.5m Jumper cable N-male => N-female low loss H-500
1 x	3m Jumper cable N-male => N-female low loss H-500
3 x	Mikrotik RB433AH
1 x	2.5m Jumper cable N-male => N-male low loss H-500
1 x	1.5m Jumper cable N-male => N-female low loss H-500
1 x	1m Jumper cable N-male => N-female low loss H-500
1 x	2m Jumper cable N-male => N-female low loss H-500
1 x	3m Jumper cable N-male => N-male low loss H-500
1 x	5m Jumper cable N-male => N-male low loss H-500
1 x	MMCX Male Crimp LMR-100, RG-174, RG-316
1 x	4m Jumper cable N-male => N-female low loss H-500
1 x	Nanostation M2 loco
1 x	4m Jumper cable N-male => N-male low loss H-500
1 x	5m Jumper cable N-male => N-female low loss H-500
1 x	Mesh omni 2.4 Ghz
1 x	Lan cable tester
1 x	Passive PoE Injector with cat5 cable
1 x	Wallmount 25cm
1 x	Patchkabel 5m Cat5e
1 x	Ubuquiti SRX 300, PCI Express a/b/g card
1 x	Omni 5 dB N-male
1 x	Dualband mesh Omni 2.4 / 5.6 Ghz
1 x	23dBi 5GHz Panel Enclosure antenna
1 x	Omni 10 dBi

€8,123.00

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]

€25.00

Dualband mesh Omni 2.4 / 5.6 Ghz[RD2458-5-NM]

Dualband mesh Omni 2.4 / 5.6 Ghz
[RD2458-5-NM]